西门子上海地区代理商|模块代理

西门子上海地区代理商|模块代理

西门子上海地区代理商|模块代理

Operating range without restrictions:

Temperature range from -15 °C to +40 °C (5 °F to 104 °F), installation altitude up to 1000 m (3281 ft).

If deviating conditions are encountered, the S1 characteristic of the motor must be adapted with regard to speed and torque.

Use the following equation to calculate the reduced S1 characteristic:
S1red (n) = xD × S140 °C (104 °F); 1000 m (3281 ft) (n/xD)

Installation altitude above sea level

Derating factor xD

at an ambient temperature of

m (ft)

5 °C (41 °F)

10 °C (50 °F)

20 °C (68 °F)

30 °C (86 °F)

40 °C (104 °F)

50 °C (122 °F)

In motors with integrated OCC/DRIVE-CLiQ interface, the sensor signal is already digitally prepared in the motor, and then transferred quickly and without loss to the drive system. Motors with an OCC/DRIVE-CLiQ interface simplify commissioning and diagnostics, as the motor parameters and encoder system are identified automatically.

Singleturn absolute encoder

This encoder outputs an absolute angular position between 0° and 360° in the specified resolution. In contrast to the multiturn absolute encoder, it does not have a revolution counter, and can therefore only supply the position value within one revolution. It does not have a traversing range.

Multiturn absolute encoder

This encoder outputs an absolute angular position between 0° and 360° in the specified resolution. It can also count 4096 revolutions. So with a ball screw, for example, the absolute position of the slide can be determined over a longer distance.

14th position in the Article No. of the motor

Designation